Wipcool Low Profile High Flow Tank Pump P380  
High-performance, low-profile condensate pump with increased head-lift.


TANK PUMP P380
Economical solution for drainage demands with a lift of up to 7 meters and a flow rate of up to 400L/h. Suitable for devices with a cooling capacity under 500,000 BTU/hr. Built-in safety switch and probe level sensor ensure long running time. Buzzer fault alarm improves safety. Built-in anti-backflow valve prevents water from returning to the tank. In addition, this pump is only 119mm in height, making it a good fit for limited spaces.

REQUEST A QUOTE

Voltage: 100-230V~/50-60Hz
Discharge Head(max.): 6.8m(22ft)
Flow Rate(max.): 380L/h(100GPH)
Tank Capacity: 1.8L
Sound Level at 1m: 28dB(A)
Ambient Temp.: 0℃~50℃
Power Consumption: 20W



Wipcool Floating-Ball Condensate Trap PT-25    
The device is commonly used in heating, ventilating and air conditioning (HVAC) and steam systems to remove accumulated condensate from the system, helping to prevent water from accumulating and damaging the system.


CONDENSATE TRAP PT-25
The WIPCOOL floating-ball condensate trap is designed to solve the problems of outdoor air reflux, odour, and harmful insect invasion in the condensate discharge pipeline of the air conditioning. Controlled by floating ball valve, the disadvantage of traditional water traps not being able to perform their water sealing function during dry seasons is avoided. Adopting a buckle design, it is easy to install, clean and maintain, providing users with a fresh indoor environment.

REQUEST A QUOTE

Inner diameter: Ø25
Outer diameter: Ø32
Negative pressure: 1200Pa
Gross weight: 115g



Wipcool PT-25V Vertical Type Condensate Trap 
Lightweight design, easy to install. Built-in gasket seal ensures no leakage. Made of PC material, anti-aging and corrosion-resistant. 


CONDENSATE TRAP PT-25V
The WIPCOOL Vertical Type condensate trap is designed to solve the problems of outdoor air reflux, odor, and harmful insect invasion in the condensate discharge pipeline of the air conditioning. The condensate trap controlled by a sensitive rebound valve, which will open by the gravity of the creating condensate water and close when there is no condensate water created. Adopting a buckle design, it is easy to install, easy to maintain, and provides users with a fresh indoor environment.

 

Inner diameter: Ø25
Outer diameter: Ø32
Negative pressure: 1200Pa
Gross weight: 60g